#Design concepts laminator dc8h manual full#

If bubbling is due to hot spots, make sure youвЂ™re not leaving the machine idle for long (so roll temperature stays consistent), speed up the laminator and try reducing the temperature slightly.

Ensure thereвЂ™s a consistent temperature вЂ“ When you have hot spots on the rolls, the ink can boil.

ItвЂ™s one of those instances where waiting saves time in the long run

Make sure the ink is dry вЂ“ This is the same as with the issue around film sticking.

Feed more slowly вЂ“ You shouldnвЂ™t feed the print into the machine faster than the laminator speed.

The correct tension depends on the film (the thicker the film, the more tension it needs), so check the specification

Adjust the tension on the feed spool based on the film spec вЂ“ If thereвЂ™s insufficient tension, air can get trapped between the film and the print.

When you try to finish straight off the back of digital print, youвЂ™re more likely to have issues with film stickingД«ubbling is generally a combination of many factors, so thereвЂ™s no single quick fix.

Make sure the ink is dry вЂ“ Leave time for the print to cure before laminating.

If you have cool spots on the product, it means thereвЂ™s an area on the roll thatвЂ™s not hot enough to melt the adhesive When you start laminating from cold, you risk having different temperatures on parts of the roll, which affects the quality of the finishing.

#Design concepts laminator dc8h manual full#

Turn the machine on early so itвЂ™s full of heat вЂ“ Often, printers turn the machine on right before they want to use it.Sometimes you might even need encapsulation film, check out my article about the differences between encapsulating and laminating. Start by choosing the right one for the print job (get advice on this!). Use the right film вЂ“ Films react differently to different stocks, inks and machines because no film is universal.The denser the ink coverage, the harder it is to get the film to stick. This is particularly common with digital print, and itвЂ™s because of the ink composition and the way inks bond to the adhesive. Use these mini-checklists to help you streamline production and give your customers better quality. So how do you solve them? In this blog post, I give basic solutions to these problems and more.

These are 2 of the most common troubleshooting questions printers ask me about laminating, and they reflect a lot of pent-up frustration.ДЄfter all, finishing issues like these delay jobs, waste film and waste stock. Laminating machine problems usually go something like thisвЂ¦вЂњHow do I get the film to stick properly?вЂќ and вЂњHow do I stop getting bubbles under the film?вЂќ